Pentax Optio 43WR - Manual (Page 105)

103
9
Camera Settings
You can display an image recorded with the camera as the welcome
screen when the camera is turned on.
1
Select [Screen Setting] on the [B Set-up] menu.
2
Press the four-way controller (5).
The Screen Setting screen will be displayed.
3
Press the four-way controller (5).
The screen for changing the start-up screen
will be displayed.
4
Press the four-way controller (45)
to select O (On) or P (Off).
O Displays the start-up screen.
P Does not display the start-up screen.
5
Press the b button.
6
Use the four-way controller (45) to select the image
you want to display as the start-up screen.
7
Press the OK button 4 times.
The camera is ready for capture or playback.
Changing the Start-up Screen
Once the start-up screen has been set, it will not be erased even if the
original image is deleted or the SD Memory Card is formatted. To delete
the start-up screen, reset the setting. (1p.107)
Change Start-up
OK OK Exit MENU
Start-up Screen
Optio
Image
00_Optio43WR-E.book Page 103 Wednesday, February 25, 2004 1:23 PM