Pioneer BDP-V6000 User Manual

Page 69

• No sound is out

put.

• Sound is not out

put

properly.

re you trying to listen to the

sound of the

HDMI OUT

rminal while watching the

picture from the
COMPONENT VIDEO or
VIDEO output terminals?

Audio signals a

re not output from the

HDMI OUT terminal when video

signals a

re being output from the

COMPONENT VIDEO or VIDEO

out

put terminals. When watching the picture of the

COMPONENT

VIDEO or VIDEO output terminals, connect an optical digital audio
cable o

r regular audio cables to listen to the sound (page 21). Once

connections a

re completed, use

Setup Navigator to make the player’s

settings (

page 23).

HDMI Audio Out properly

set?

Set

HDMI Audio Out to Auto or PCM. (page 44).

Output Terminal properly

set?

When

ANALOG AUDIO is selected at Output Terminal, no audio

signals a

re output from the

HDMI OUT or DIGITAL OUT terminal

(

page 51).

Is the out

put video resolution

properly set?

Use

OUTPUT RESOLUTION to switch to the resolution at which the

video and audio signals a

re output (page 27).

Is the AV

receiver or

plifier, etc., connected to

the

AUDIO OUT terminals?

To listen to 2-channel analog audio, connect to

FRONT (L/R) of the

AUDIO OUT terminals (page 13) and set Audio Output Mode to 2
Channel (page 43).

re the speakers properly

set?

When the AV

receiver or amplifier, etc., is connected to the

AUDIO

OUT terminals and Audio Output Mode is set to Multi-channel, set
Speaker Setup properly (page 47).

Is a DVI device connected?

The sound will not be out

put from the

HDMI OUT terminal if a DVI

device is connected. Connect the device to a

DIGITAL OUT terminal or

the

AUDIO OUT terminals (page 21).

r some BDs, audio signals are only output from

DIGITAL OUT

rminal or the

HDMI OUT terminal.

Multi-channel sound is not
out

put.

Output Terminal properly

set?

Linea

r PCM (2-channel) audio signals are output from output terminals

othe

r than the one set at

Output Terminal under Audio Out. Set

Output Terminal properly (page 51).

Is the audio out

put of the

connected AV

receiver or

plifier, etc., properly set?

Read the o

perating instructions of the connected AV receiver or

plifier and check the audio output settings of AV receiver or

plifier.

Is multi-channel sound
selected?

Use the menu sc

reen or

AUDIO to switch the disc’s sound to multi-

channel.

Is the AV

receiver or

plifier, etc., connected to

the

AUDIO OUT terminals?

When the AV

receiver or amplifier, etc., is connected to the

AUDIO

OUT terminals, set Audio Output Mode to Multi-channel (page 43).
Also, set

Speaker Setup properly (page 47).

Noise can be hea

rd when

out

putting DTS Digital

rround signals from the

DIGITAL OUT terminal.

Is the connected AV

receiver

r amplifier compatible with

DTS Digital Su

rround?

If an AV

receiver or amplifier that is not compatible with DTS Digital

rround is connected to the

DIGITAL OUT terminal, set DTS Out to

DTS

 PCM (page 43).

192 kHz o

r 96 kHz digital

audio signals cannot be
out

put from the

DIGITAL

OUT terminal.

It is not

possible to output 192 kHz or 96 kHz digital audio signals from

this

player’s

DIGITAL OUT terminal. The signals are automatically

conve

rted to 48 kHz or less for output.

Seconda

ry audio or

inte

ractive audio is not

out

put.

HDMI Audio Out properly

set?

When listening to the sound f

rom an

HDMI OUT terminal, set HDMI

Audio Out to PCM (page 44).

Dolby Digital Out and

DTS Out properly set?

When listening to the sound f

rom an

DIGITAL OUT terminal, set Dolby

Digital Out to Dolby Digital 1, DTS Out to DTS 1 (page 43).

Sound is fast o

r slow.

When an HDMI cable is
connected, a

re audio signals

being out

put from devices

connected with cables othe

than HDMI cables?

When a Pionee

r AV receiver or amplifier compatible with the PQLS

function is connected di

rectly to the player’s

HDMI OUT terminal using

an HDMI cable, the PQLS function is activated when

playing discs.

Because of this, the sound out

put from components other than the

ones connected by HDMI cable may be fast o

r slow. If this happens, set

PQLS to Off (page 44).

Afte

r a disc is inserted,

Loading stays displayed and
playback does not start.

re there too many files

recorded on the disc?

When a disc on which files a

re recorded is inserted, depending on the

numbe

r of files recorded on the disc, loading may take several dozen

minutes.

 is displayed in file names,
etc.

The cha

racters that cannot be displayed on this player are displayed in

.

Problem

Check

Remedy

V6000_CUXJ_EN.book 69 ページ２００９年６月５日　金曜日　午前１１時５７分