Pioneer BDP-V6000 - Manual (Page 19)

19
En
03
• The following restrictions apply when HDMI High
Speed Transmission is set to Off:
– Dee p Color signals are not output.
– If the out put video resolution is set to Auto, the
signals a re output with a resolution of 1080/60i or
1080/50i when TV’s preferred resolution is 1080/60p
o r 1080/50p.
– When the out put video resolution is set to 480i/576i
o r 480p/576p, Dolby TrueHD and DTS-HD Master
Audio audio signals a re output as Dolby Digital,
DTS Digital Su rround or linear PCM signals. 96 kHz
o r 192 kHz multi-channel audio signals are output
as linea r PCM 2-channel audio signals (page 52).
• When an HDMI cable with a built-in equalize r is
connected, it may not o perate properly.
 When connected to a DVI device
• It is not possible to connect DVI devices
(computer displays, for example) that are not
compatible with HDCP. HDCP is a specification to
protect audiovisual content across the DVI/HDMI
inte
rface.
• No audio signals a re output. Connect using an audio
cable, etc.
• This player is designed for connection with HDMI-
com patible devices. When connected to a DVI device,
it may not o perate properly depending on the DVI
device.
About KURO LINK function
The functions listed below wo rk when a Pioneer KURO
LINK-com patible Flat Panel TV or AV system (AV receiver
o r amplifier, etc.) is connected to the player using an
HDMI cable.
Functions operated from the TV
Such
player operations as starting and stopping playback
and dis playing the menus can be performed from the Flat
Panel TV.
Auto-select function
The in
put switches automatically on the Flat Panel TV and
AV system (AV receiver or amplifier, etc.) when playback
is sta rted on the player or the Home Menu or Home Media
Galle ry is displayed. When the input is switched, the
playback picture, the Home Menu or Home Media Gallery
a
ppears on the Flat Panel TV.
Simultaneous power function
When
playback on the player is started or the Home Menu
o r Home Media Gallery is displayed, if the Flat Panel TV’s
power was off, its power turns on automatically. When the
Flat Panel TV’s
power is turned off, the player’s power
automatically tu rns off.
Unified language function
When the language info
rmation from a connected Flat
Panel TV is received, you can have the player’s on-screen
dis play language change automatically to that of the Flat
Panel TV. This function is available only when playback is
sto pped and the menu screen is not displayed.
Caution
• Also refer to the operating instructions of the Flat
Panel TV and AV system (AV receiver or amplifier,
etc.).
Note
• CONTROL on the player’s front panel display lights
when the KURO LINK function is activated (
page 13).
 To use the KURO LINK function
• The KURO LINK function only wo rks when outputting
video signals f rom the HDMI OUT terminal.
• The KURO LINK function wo rks when KURO LINK is
set to On on the player (page 44).
• The KURO LINK function o perates when KURO LINK
is set to On fo r all devices connected with HDMI
cables. Once connections and the settings of all the
devices a
re finished, be sure to check that the player’s
picture is output to the Flat Panel TV. (Also check after
changing the connected devices and
reconnecting
HDMI cables.) The KURO LINK function may not
o
perate properly if the player’s picture is not properly
out put to the Flat Panel TV.
• Use High S peed HDMI™ cables when using the
KURO LINK function. The KURO LINK function may
not o
perate properly if other HDMI cables are used.
• Fo r some models, the KURO LINK function may be
referred to as “HDMI Control”.
• The Simultaneous power function is activated when
the player is set as follows (page 44):
Display Power On: On
Display Power Off: On
 About PQLS function
The PQLS (P recision Quartz Lock System) is a transfer
cont rol technology using the KURO LINK function. The
player’s output signals are controlled from the AV
receiver or amplifier to achieve high quality sound
playback using the quartz oscillator of AV receiver or
am
plifier. This eliminates the influence of the jitter
gene rated upon transfer which can adversely affect the
sound quality.
• The player supports the “PQLS 2ch Audio” function
that is only activated when playing audio CDs (CD-
DAs), and the “PQLS Multi Su rround” function that is
activated when playing all discs (BDs, DVDs, etc.)
with audio out put in linear PCM.
• The “PQLS 2ch Audio” function is only activated when
a Pionee r AV receiver or amplifier compatible with the
“PQLS 2ch Audio” function is connected di rectly to
the player’s HDMI OUT terminal using an HDMI
cable, and when the player is set as follows (page 44):
KURO LINK: On
PQLS: Auto
• The “PQLS Multi Su rround” function is only activated
when a Pionee r AV receiver or amplifier compatible
with the “PQLS Multi Su rround” function is
connected di rectly to the player’s HDMI OUT
V6000_CUXJ_EN.book 19 ページ ２００９年６月５日 金曜日 午前１１時５７分