Philips Xalio Vox - Manual (Page 41)

Connection to a PABX 37
Connection to a PABX
If you use your Xalio Vox on a telephone line connected to a PABX (Private
Automatic Branch Exchange), instead of a direct connection to the public
telephone network, it may be necessary to change certain settings on your
telephone.
Selecting network type
To connect your Xalio Vox to a PABX you may need to change the network setting
of the telephone.
Press
R
to enter menu mode.
Press
-
until
BASE SETUP
is displayed.
Press
o
until
PUBLIC
or
PABX
is displayed.
Use
+
and
-
to choose one of the possible PABX settings from the
selection available.
Several settings are proposed.
Press
o
.
Your handset will beep to indicate that the new network type has been set.
Press
R
to leave menu mode.
Depending on your PABX, you may need to try different PABX settings before you
find the best setting.
Note:
If you want to reconnect your Xalio Vox to the public network again, don’t forget to
set the network type to PUBLIC. The optimum settings for the public network will
automatically be reset.
1
2
3
4
5
6