Philips QSG XL340 - Manual

Welcome
Quick start guide
1
Connect
2
Install
3
Enjoy
philips
Problem
● Check the connections.
● Use the line cord provided in the
box.
● Try to place the base station at
least one metre away from any
electrical appliances.
● Make sure the product is plugged.
● Charge the batteries.
● Check base/charger connections.
● Check that the batteries are
inserted correctly.
● Caller ID service may not be acti-
vated. Check with your service
provider.
Troubleshooting
For detailed overview see user manual.
Tip
● No dial tone.
● Poor audio quality.
● No symbol on the display.
● The handset does not charge.
● Caller ID does not display.
Need help?
User manual
See the user manual that came with your XL340.
Online help
www.philips.com/support
Save a name and a number in an extra memory
1. Enter the number in standby mode.
2. Press and hold one of the digit keys (1 to 9).
3. Enter the name.
4. Press and hold the same digit key to save the name.
Call from phonebook memory
Press while viewing a memory.The saved number is dialed.
To insert a pause press and hold , P is is shown.
View phonebook memory
Press one of the direct memory keys or or
OR
press and hold one of the digit keys (1 to 9).
The name and number will be shown.
If the number is longer than 12 digits, only the last 12 digits are shown on
display.
© 2007 Koninklijke Philips Electronics N.V.
All rights reserved.
Reproduction in whole or in part is prohibited without
the written consent of the copyright owner.
Document order number: 3111 285 33951
QSG XL340_US-EN.qxd 26.03.2007 19:16 Seite 2