Philips Xalio Vox - Manual (Page 10)

Installing your Xalio Vox 6
Installing your Xalio Vox
Connecting your phone
Deciding where to put the base station
•
To reduce to a minimum any interference with other electronic devices such as
telephones, televisions, screens, etc. we advise you to place your base station at
least 50 cm from any other electronic device.
•
Place the base station on a flat surface such as a desk.
•
Do not install the base station in a damp or humid room.
•
Do not place the base station near a strong source of heat.
The operating range of your cordless telephone will vary according to your
environment. Significant obstacles such as concrete walls or metallic supports
(windows and door frames, partitions, etc.) will lessen the communication range
between the base station and the handset.
Note:
Your Xalio Vox can be adapted for a wall installation using a wall mounting bracket
available from your local Philips dealer.
Connecting the base station
Make sure that you connect the power plug to the correct mains voltage of 230 V.
Note:
You can connect a Philips battery backup unit between your telephone and the
power supply. Please refer to the instructions for use of this accessory.
2 Step two
Plug the power cable
into the base station
and then into the wall
outlet.
Plug the telephone
cable into the base
station and then into
the telephone
connector on the wall.
1 Step one
2 1