Philips Xalio Vox - Manual (Page 22)

Your Xalio Vox answering machine 18
Erasing messages
Erasing individual messages
Press the
r
key on the handset.
r
is displayed.
The display shows the day, time and the number of messages received.
If it has been selected, the voice prompt starts up.
Press
V
.
The answering machine plays back the messages.
While listening to the messages, press
x
when the answering
machine plays back the message you want to erase.
A beep confirms that the message has been erased. The number of the
received messages displayed is updated automatically.
Erasing all the messages received
Press the
r
key on the handset.
Press
s
.
Press and hold
x
for more than 1.5 seconds.
A beep confirms that all the messages have been erased.
Personalising your answering machine
If you have recorded an outgoing message and set the day and time, you can use
your answering machine. However, you can also personalise the settings your
answering machine.
The following possible settings are available:
•
Select the voice prompt for received messages (
VOICE
).
See “Switching the message voice prompt on or off” on page 19.
•
Define a remote control code (
RCC: - - - -
).
See “Entering a remote control code” on page 19.
•
Choose the number of times the telephone rings before your answering machine
picks up (Number of rings).
See “Changing the number of rings” on page 20.
•
Decide whether your callers can leave a message (
REC MESS
).
See “Switching message record on or off” on page 21.
1
2
3
1
2
3