Panasonic KX-MC6040 - Manual (Page 84)

11. Help
84 For assistance, please visit http://www.panasonic.com/help
“ Memory Overflow” L When printing a file, the document being stored exceeded the memory
capacity of the unit. Change the printer settings (page 29).
“ Modem Error” L There is something wrong with the unit’s modem. Contact our service
personnel.
“ No Fax Reply” L The other party’s fax machine is busy or has run out of recording paper. Try
again.
“ Out of Paper Input Tray
#1”
L Recording paper is not installed or the paper input tray has run out of paper.
Install paper (page 16, 30).
L Recording paper was not fed into the unit properly. Reinstall the paper
(page 16, 30).
Note:
L “ #1”: Standard input tray
L “ #2”: Optional input tray
L “ #1+#2”: Standard input tray and optional input tray
“ Paper Jammed” L A recording paper jam occurred. See the other displayed message
instructions to remove the jammed paper (page 95).
“ PC Fail or Busy.” L The cable or the computer power cord is not connected correctly. Check the
connections (page 18, 26).
L The software is not running on the computer. Restart the software and try
again.
“ Please Wait” L The unit is warming up. Wait for a while.
“ Redial Time Out” L The other party’s fax machine is busy or has run out of recording paper. Try
again.
“ Remove Document” L The document is jammed. Remove the jammed document (page 100).
L Attempted to send or copy a document longer than 600 mm (23
5
/
8
") using
the automatic document feeder. Press {Stop} to remove the document.
Divide the document into two or more sheets and try again.
“ RX Memory Full” L The memory is full of received documents due to a lack of recording paper
or a recording paper jam. Install paper (page 16) or remove the jammed
paper (page 95).
L If feature #442 (page 62) is set to “ Always”,
– check the connection between the computer and the unit.
– check the computer is turned ON.
L If feature #448 (page 62) is set to “ On”,
– view, print or save the received fax documents (page 48, 49), and then
erase the unnecessary documents (page 49).
– turn the setting to “ Off”. The fax documents stored in memory will be
printed automatically.
– set feature #449 (page 62) to “ On”, and then print the received fax
documents (page 49).
“ Scanner Position Error” L There is something wrong with the scanner position. Turn the power switch
OFF, then ON. If the problem cannot be solved, contact our service
personnel.
“ Self Calibration” L The unit is changing the color calibration. Wait for a while.
“ Transmit Error” L A transmission error occurred. Try again.
“ Toner Cartridge Not
Installed”
L The toner cartridge is not installed. Install it (page 11).
“ Tray #2 Left Cover
Open”
L The left cover of the optional input tray is open. Close it.
Display Cause & Solution