Help 83 – Panasonic KX-MC6040 User Manual
Page 83

11. Help
83
For assistance, please visit http://www.panasonic.com/help
“
Check Pick Up Input
Tray #1”
L
Recording paper was not fed into the unit properly. Re-insert the recording
paper (page 99).
Note:
L
“
#1”: Standard input tray
L
“
#2”: Optional input tray
“
Color Drum Life Low”
“
Monochrome Drum Life
Low”
L
The drum cartridge life is near its end. Replace the drum cartridge as soon
as possible.
“
Color Drum Replace”
“
Monochrome Drum
Replace”
L
The drum cartridge life is finished. Replace the drum cartridge immediately.
Note:
L
The continuous use of an old drum cartridge may cause malfunction. To
prevent this, when the drum life is finished, the unit will stop printing after a
while, and printing will not be possible until a new drum cartridge is
installed.
“
Cool Down Fuser”
L
The unit is cooling down the fuser unit. Wait for a while.
“
Directory Full”
L
There is no space to store new items in navigator directory. Erase
unnecessary items (page 43).
“
Drum Not Installed”
L
The color drum cartridge or the monochrome drum cartridge is not installed.
Install it (page 11).
“
E-Mail Size Over”
L
When performing scan to e-mail server, the total file size of scanned data
exceeded the file size limitation. Divide the document into sections.
“
Fax in Memory”
L
The unit has a document in memory. See the other displayed message
instructions to print out the document. For fax memory capacity, see page
105.
L
If feature #442 (page 62) is set to “
Always”,
–
check the connection between the computer and the unit.
–
check the computer is turned ON.
L
If feature #448 (page 62) is set to “
On”,
–
view, print or save the received fax documents (page 48, 49), and then
erase the unnecessary documents (page 49).
–
turn the setting to “
Off”. The fax documents stored in memory will be
printed automatically.
–
set feature #449 (page 62) to “
On”, and then print the received fax
documents (page 49).
“
File Size Over”
L
When performing scan to FTP server, the total file size of scanned data
exceeded the file size limitation. Divide the document into sections.
“
Front or Left Cover
Open”
L
The front or left cover is open. Close it.
“
Keep Copying”
L
Copying has stopped due to some existing problem (example: a lack of
recording paper or a recording paper jam). See the other displayed
message instructions to continue copying.
“
Low Temperature”
L
The inside of the unit is extremely cold and cannot be operated. Use the unit
in a warmer area.
“
Memory Full”
L
When performing memory transmission, the document being stored
exceeded the memory capacity of the unit. Send the entire document
manually.
L
When making a copy, the document being stored exceeded the memory
capacity of the unit. Press {Stop} to clear the message. Divide the
document into sections.
Display
Cause & Solution