Adjusting voice volume, Muting a call, Using speakerphone – Planet Technology VIP-321 User Manual
Page 42: Redialing last dialed number, Flash signal
press any key. During the conversation, the display shows the elapsed time.
To end the call, either press the key or replace the handset on the base.
Adjusting Voice Volume
During a conversation, press the Up or Down key to adjust the level of the earpiece volume (or the
d
hands free speakerphone one, if activated). You can adjust the volume in five levels which are showe
by the bars of the icon
,the more bars filled blue, the louder the volume. When the last bar is filled
red, this means the voice volume reach the maximal level.
Muting a Call
tion, you can temporarily mute the microphone so that the party on the other end of
During a conversa
the line cannot hear you. During the period you can still hear the him/her. This mode allows you to have
a conversation with someone near you and avoid that the party at the phone is hearing what you are
saying.
To mute you microphone, just press the Right key during the conversation: the icon
will appear on
the display.
To un-mute the microphone, just press again the Right key: the ico
will disappear and you will
n
restore the normal condition.
Using Speakerphone
n the speakerphone built in the handset. In this mode you can simply put
ppears
kerphone off, and keep on talking in normal mode, press again the key. The icon
During a call, you may turn o
your handset on a surface (e.g. a desk) and enjoy the comfort of the hands free conversation.
To turn the speakerphone on, press the key during a call (line engaged). The icon a
on the display.
To turn the spea
will disappear.
Redialing Last Dialed Number
ain the last dialed number.
Your phone allows you to quickly call ag
press the REDIAL key to dial out
Pick up the handset and press the key to engage the line. Then
the last dialed number.
Í
Note
The caller’s identification can work only if your telephone
network supports the service as well as the caller’s one.
However the caller can still hide his/her number.
Flash Signal
When the line is engaged, the R key sends the Flash signal. This key is used in conjunction with special