Planet Technology VIP-321 - Manual (Page 22)

Replace rule The prefix number. It only accept the numeral and the max length is 8.
+ The identification number. It can accept the numeral or symbol and the max
length is 40.
„ Symbol: It only accept the [+], [x]
„ +: It means as “or”. For example, [123+456+334+5xx] even if [123
or 456 or 334 or 5xx]
„ x: It is equal to 0~9. For example, [5xx] even if the number begin 5.
Dial Now If the dialing number are match with this field, it will dial out and need not to
press the “#” key to end the dialing. It accepts the numeral or symbol, and the
max length are 124.
Note: The starting number can’t be the “0”. For example, if the number is
“0xxxx”, because the starting number is “0”, so that the system will ignore this
dial plan.
Auto Dial Time Stop dialing after seconds then send dial number out.
Use # as send key
If setup as Yes, the system sill stop to receive the dialing number when
receive the [#] key. The system also will to determine the Auto Dial Time, it
will carry out the calling if there isn’t receive the digit after the Auto Dial Time.
If setup as No, the system just according to the Auto Dial Time to determine
the end time.
Use * for IP dialing
If setup as Yes, the system will look on [*] as [.]. For example, if dial the
“192*168*0*100#”, it will dial out as “192.168.0.100#”.
If setup as No, it just look on [*] as [*]. For example, if dial the “700*#”, it will
dial out as “700*#”.