Planet Technology VIP-321 - Manual (Page 41)

Í
Note
1. The time setting must be entered in 24H format.
2. In the state of FSK standard, the date and time will be
automatically set when you receive a call to this unit.
Handset Basic Functions
Making a Call
ers up to 25 digits which are shown in the display. If the number is longer than 8 You can dial numb
digits, the display automatically switches a smaller font in order to accommodate the whole number.
You can make your calls in two ways.
Traditional Mode
p the handset and press the key to engage the line. Then you will hear a
e number as you have entered it.
et on the base.
Step1. Please pick u
dial tone and that icon appears in the icon area.
Step2. Please dial a telephone number and the display shows th
When you hear your called party, speak with a normal voice.
Step3. To end the call, either press the key or replace the hands
High Featured Mode
venient and reliable; because you can check the number you have entered
umber and check the number on the display. If you have made
e
This procedure is more con
and eventually make corrections.
Step1. Please enter a telephone n
mistakes (i.e. the number you dialed is not the one you wanted to call) modify it by using th
Left key.
Step2. When the number correctly appears, press the key to dial it out.
Receiving a Call
d, the phone rings and the display show "Incoming Call". If the incoming call When a call is receive
can be identified (i.e. caller's information is transmitted from the network on which the call was made
and the caller doesn't hide it) you will also see the caller's number in the display.
Answer the call, by pressing the key or the ACCEPT key, or if the handset is on the base and you
have activated the "Auto Answer" function , simply pick it up to answer the call, you don't need to