Planet Technology VIP-321 User Manual
Page 11
Rear Panel of VIP-321
Physical Interfaces Description
WAN
RJ-45 connector, to maintain the existing network structure,
connected directly to the xDSL/Cable modem through
straight CAT-5 cable.
LAN
RJ-45 connector, for Internet access, connected directly to
Switch/Hub, through straight CAT-5 cable.
RESET
Reset to the factory default setting.
LINE
RJ-11 connector, connected directly to the PSTN analog line.
Press "
＊＊
" to switch to PSTN mode.
Power
7.5V DC Power input outlet.
•
Machine default IP is
http://192.168.0.1
. Press RESET
button and hold over 10 seconds will reset the device to
factory default value.
•
If press RESET button 1~9 seconds only to enable the
device reset function.
Í
Note