Paradise P300 User Manual
Page 56
P300H
P300 Series Modem Installation and Operating Handbook
Page 56
Backward Alarm facility:[?]
1=Normal (Back' Alm) 2=No Backward Alarm
Change, Tx/Rx, Service, Closed Net, Plus ESC, BA Menu
If
No ESC
is chosen then the dialogue ends here, otherwise it proceeds with the Backward alarm option as
follows:
NORMAL
A Backward alarm facility is provided causing a deferred alarm to be raised on
this local equipment if the distant end Rx fails for any reason (eg local Tx failure,
or distant Rx failure). The proportion of the overhead assigned to the ESC drops
slightly (68% to 65%), so the overhead may increase marginally to provide the
same async ESC rate.
NO BACK' ALM
No Backward Alarm is sent (Tx) or received (Rx) and so slightly more of the
overhead is available to the async ESC, lowering the total overhead marginally.
See "Overhead Rates" in section 8.7.1 on page 147 for details of the overhead percentage requirements
for differing mixes of main data and async ESC data rates.