Planet Technology VIP-2100 - Manual (Page 96)

VIP-2100 User ’s manual - 91 -
Chapter 10 Telnet & RS-232 Configuration
VIP-2100 also can support to be managed by Telnet or Console port
(RS-232) for basic operations.
Interface:
v Network: TCP/IP Telnet
v RS232:
- Connect using: COM1
- Baud Rate: 9600
- Data bits: 8
- Parity: None
- Stop bits: 1
- Flow Control: None
- Wire: Null modem line (crossed)
Logon VIP-2100 by Telnet
Use Windows build-in Hyper Terminal or other telnet terminal emulator
to login (e.g. telnet 192.168.111.111:10086). User ID & password will be
required for login (default login user id: admin, password: admin & user id:
root, password: root).
Command List:
Command Description
echo Auto echo on or off
eventlog Clean or show system log message
exit Quit the current session
ipconfig Configure or show network information
ping Check an IP address is available or not
reboot Reboot
reset Soft-reset
shutdown Shutdown
time Reset or show system time.
timezone Setup or show system timezone
useradmin Manage user account.
help & ?
View command list
Echo: auto echo on or not
Command Purpose
[root#]echo ? Usage: echo on/off
Example: echo on
[root#]echo on Echo is on
[root#]echo off Echo is off (default ralue)