Planet Technology VIP-2100 - Manual (Page 76)

VIP-2100 User ’s manual - 71 -
Figure 7.7-7
Number Replace
The purpose of
“Number Replace” is to replace called number or
calling number for PSTN or IP. It must be used in call flow to take effect.
Step 1: It is useful for real PSTN number to virtual VoIP number replacement.
Click Number Replace to add a new Number Replace Group, add as
figure 7.8-1.
Figure 7.8-1
Field Description:
•
Group ID: 1 (Number Replace Group identify)
•
Description: SIP in
Step 2: Click the New created NR and Detail button to add digits setting as
figure 7.8-2.
Figure 7.8-2
Field Description:
•
Original Number: Original number filter
•
Target Type: ANI or DNIS
•
Target Number: The ANI or DNIS are change to target nubmer
Routing Plan
The purpose of Routing Plan is to select T1/E1 trunk and channels by
your preference when there is a call from IP side to PSTN side. The PSTN
must be used in call flow edit or line hunting component to take effect.
Hunting Group
Start Path: Configuration→Routing Plan→Hunting Group