Planet Technology VIP-2100 - Manual (Page 62)

VIP-2100 User ’s manual - 57 -
- T1 DMS100 ISDN
- T1 NTT ISDN: used to connect NTT INS-1500 ISDN standard (Japan
Only)
- T1 HKT ISDN
- T1 QSIG
- T1 EURO ISDN
- T1 DMS100 MERIDIAL ISDN
- T1 NI1 ISDN
o For E1:
- E1 EURO ISDN: used for most of European ISDN standard
- E1 MFCR2
- E1 CAS
- E1 RAW CAS
- E1 AUSTEL ISDN: Australia E1 ISDN Variance
- E1 HKT ISDN: Hong E1 ISDN Kong Variance
- E1 KOR ISDN: Korea E1 ISDN Variance
- QSIO
- E1 TNZ ISDN
•
Line Code: T1: you can choose AMI, B8ZS; E1: you can choose AMI,
HDB3
•
PSTN Trace: PSTN layer debug trace. It will generate a debug trace file
for tracing purpose. Only enables it under Welltech technical supports
instruction and disable it when complete the debug
•
Inbound DM Group: Digit Manipulation group used for incoming calls
associated to this trunk
•
Outbound DM Group: Digit Manipulation group used for outgoing calls
•
Local Ring Back: Provide ring back tone for PSTN or not. It only works
when VoIP outgoing Fast Start is disabled.
•
Channel Mask: Channel mask for incoming or outgoing calls (default:
0xffffffff)
Start from MSB each bit, indicate a time, slot a trunk (e.g. 0x0000ffff:
0~15 B channel mask, 17~31 B channel free)
•
Clock Master: PSTN trunk clock source
Advance Trunk Configuration:
Start Path: Configuration→Interface →Trunk →Advance