Planet Technology VIP-2100 - Manual (Page 75)

VIP-2100 User ’s manual - 70 -
New a Calling Rate: The calling rate will have different appearance for
different calling rate policy set in Radiu configuration.
Click Calling Rate button to add a new calling rate as figure 7.7-5.
Figure 7.7-5
Point per Second calling rate:
Calling rate (point per second) is used to convert prepaid point into
prepaid time in second. For example, you can set calling rate to 5 for
“100”
prefix. When a caller, which has 200 prepaid point, calls
“100xxxx”, the max
talk time will be 200/5=40 seconds. If a calling rate is set to
“0”, it means free
charge.
New a Calling Rate (Second per Point):
Click Calling Rate button to add a new calling rate as figure 7.7-6.
Figure 7.7-6
Second per Point calling rate:
. Calling rate (Second per point) is used to convert prepaid point into
prepaid second in time. For example, you can set calling rate (Second) to 6,
charge point to 1 for
“113” prefix. It means that every 6 seconds charge 1
point. When a caller, which has 200 prepaid point, calls
“113xxxx”, the max
talk time, will be 200*6/1=1200 seconds.
J Note: Tel prefix * is used as a default rate, you need to create it to
work.
Search Condition:
You can search a user by User ID, Prepaid or Postpaid condition as figure
7.7-7.