Wap usb mass storage – Pantech PG-3500 User Manual
Page 67
131
130
Cache
[1.9]
Cache Mode
[1.9.1]
Sets up the Cache memory check.
- Always Check: The Cache is always checked whenever a URL is
loaded.
- Never Check: The Cache is never checked.
Clear Cache
[1.9.2]
This menu provides a function to clean the data stored in
the Cache (recently visited WAP pages).
Security Cert
[1.10]
You can see the saved security certificate.
Press the [Option] Soft key [
[
] to;
• Delete: Deletes a security certificate.
• Delete All: Deletes all security certificates.
Version
[1.11]
This function is for viewing the software version of the WAP
browser.
Select ‘Menu>8.Connectivity>2.USB Mass Storage’.
Provides the function to use the Micro-SD Card (Trans-
Flash Card) of the phone as a movable storage site by
using a USB Cable.
To use a mass storage
If the Mass Storage is set for [On]. “Connect USB Cable”
will be displayed. At this time, connect the phone with the
paired device, and when “Connecting” is displayed, you can
use the Micro-SD Card (Trans-Flash Card) as a movable
storage site from the paired device.
WAP
USB Mass Storage
NOTE: When the USB cable has been already connected before you set
the Mass Storage for [On], if you set Mass Storage for [On],
“Connecting” will be displayed immediately.
While reading/writing a file from Micro-SD card (Trans-Flash card), do not
remove the Micro-SD card (Trans-Flash card) as the card may be
damaged.
If the Micro-SD card (Trans-Flash card) is used as a movable disk, please
remove the device from PC when it is disconnected from the PC. Micro-
SD Card (Trans-Flash Card).
Please remove the device at USB Mass Storage, since the files saved in
the Micro-SD Card (Trans-Flash Card) may be damaged.