Pantech PG-3500 - Manual (Page 58)

Change PIN [6.8.2]
Changes the PIN number.
Phone Lock [6.8.3]
Once selected, this option locks your phone until you input
the right password. Press the [
o
] key after you input the
password.
Change Password [6.8.4]
Changes a password. Default Password is 1234.
Application Lock [6.8.5]
Input a password and select an application and then, press
the [
o
] key to lock the application.
Call Barring [6.8.6]
You can set limitations for making certain types of calls:
- Handset Barring: You can ignore the incoming calls or restrict
certain outgoing calls with this menu.
- Network Barring: This feature is dependent on network service
provider and subscription. Some of the bars are set by the
network service provider.
You can set limitations for making certain types of calls:
- International Calls: Limits an outgoing and incoming
international call.
- Outgoing Calls: Limits all Outgoing calls.
- Incoming Calls: Limits all incoming calls.
- Incoming Calls When Abroad: When you are in the overseas
where international roaming is in operation, this feature allows
you to stop receipt of incoming calls.
- Int. Calls Except to Home Country: Limits other international
calls except home country.
113 112
Of the set values in Favorite, the item with security asks for
a password before going further.
Network Selection [6.7]
Select ‘Menu>6.Settings>7.Network Selection’.
You can select ‘Automatic’ or ’Manual’.
Security Settings [6.8]
Set ‘Menu>6.Settings>8.Security Settings’.
The security settings enable you to restrict the use of your
phone to other people and types of calls of your choice.
Various codes and passwords are used to protect these
features of your phone. They are described in the following
sections. See also Access codes in the Appendix.
The Security feature keeps your phone and SIM Card safe
from unauthorised users and you may set up a password for
your phone or use the Call Barring service and Fixed
Dialling mode.
SIM Lock [6.8.1]
Press the [ l / r ] key for setup.
You should input the password when entering into the sub-
menu under Security Settings. If you fail to input the correct
PIN number 3 times continuously, you will be prompted to
input the PUK number.
- Lock: You should input the PIN number to access to the main
menu after power on.
- Unlock: You don’t have to input the PIN number to access to the
main menu after power on.
Settings Settings