Pentax Optio 450 User Manual

Page 29

Quic

k Star

Erasing the image displayed on the LCD monitor

While the image is displayed, you can erase it
by pressing the

button (The Delete screen

will be displayed.), press the four-way controller
(

) to select [Delete], and then pressing the OK

button.
Press the Playback button or press the shutter
release button halfway to return to shooting
status.

• When you turn the camera on while pressing the Playback button,

the camera turns on in Playback Only mode. As the lens does not
extend in Playback Only mode, this feature is useful when you
want to pass the camera to someone and show them the picture
you have just taken. To switch to the Capture mode, turn the
camera off and then turn it on again.

• You can enlarge the image displayed on the LCD monitor by

pressing the Zoom/

button.

• When the screen is changed to the playback screen, the image

with the largest file number will be displayed first.

• In the case of movie pictures, the first frame will be displayed.
• If there are no images stored, the [No image] message will be

displayed.

Zoom Display

☞

p.88

Adding a Voice Memo

☞

p.89

100-0020

Cancel

Delete

MENU

Exit

File No.

memo