Pentax Optio 450 - Manual (Page 25)

Caution
23
Getting Star
ted
n
When you have finished the settings, press the OK
button when the clock reaches 00 seconds.
The camera is ready to take a picture.
When you set date and time except the initial settings, press the OK
button again after pressing the OK button when the clock reaches
00 seconds to return to capture mode.
• For an accurate time setting, when you have finished the settings,
press the OK button when the clock reaches 00 seconds.
• When the initial settings screen is displayed, you can cancel the
settings operation and switch to Capture mode by pressing the
MENU/Fn button. If this is done, the initial settings screen will be
displayed next time you turn the camera on.
• You can change the settings after they have been made. Refer to
“Changing the Date/Time” (p.128).