Pentax Optio 450 - Manual (Page 119)

117
Viewing Images with your Macintosh
Pla
ybac
k/Er
asing
Caution
By using the provided USB cable (I-USB7) or card reader and image-
browser software, you can transfer images recorded with the camera
to your Macintosh and edit them or print them out.
This section explains how to view images on your Macintosh using the
provided USB driver and software.
About the included software
The included CD-ROM (S-SW7) contains the following software:
• Image-browser software (ACDSee™)
System environment
• OS: Mac OS 8.6 or later
(QuickTime 4.0 or later required)
• CPU: Power PC 266MHz or higher
• Memory: 8MB or more
• Hard disk space: 6MB or more
• Standard equipped USB port
• When you connect the camera to your Macintosh, you are
recommended to use the AC adapter. If the battery power runs out
while image data is being transferred, the data may be lost.
Installing the software
Installing the USB Driver and the ACDSee™ on your Macintosh
The procedures for installing the necessary software are explained.
Many current and recent Macintosh computers will automatically
recognize the camera and load their own USB mass storage drivers.
When you attach the camera to your Mac, the camera should
automatically appear on your desktop as an “untitled” disk drive, which
you can double click to access.