Planet Technology FPS-5P-M - Manual (Page 89)

Page 85
Bi-Admin
For more control and flexibility, or to use NetWare Remote Printer Mode, you can
use the supplied Bi-Admin management utility. Provided you have Novell's Client 32
installed, Bi-Admin will allow you to configure the NetWare Server as well as the Print
Server.
•
Bi-Admin is installed by run the Setup.exe in Utility\Bi-Admin folder in the
CD-ROM.
•
See Chapter 5 for general information on using Bi-Admin.
•
The NetWare Manual (in the Manual\NetWare folder on the CD-ROM) contains
detailed information on using Bi-Admin with NetWare Servers.
Other Methods
If you are unable to use Windows-based programs for configuration, the following
methods are available to configure the Print Server:
WPConfig This program requires Windows 3.1, and the IPX/SPX protocol.
PSConfig Menu-based DOS program, intended only to configure the Print
Server for use with NetWare V2, 3 and 4.
Quickset Command-line DOC program, intended only to configure the Print
Server for use with NetWare V2, 3 and 4. This program also has a
limited ability to configure the NetWare Server itself.
•
These programs are provided on the CD-ROM, in the Utility folder.
•
WPConfig has a SETUP program; the other programs need only to be copied to
the desired folder on your PC.
•
The documentation for these programs is provided in sub
−
folders of the Manual
folder on the CD-ROM.
•
PSConfig and WPConfig do NOT configure your NetWare Server. It is necessary
to use PCONSOLE to create the necessary print object and queues, and ensure
the appropriate users have access rights to the print queues.
Configuration Data
The Print Server requires the following "General" data, and the data for the mode
(Print Server or Remote Printer) you are using.
General
Device Name The device name (Default Server Name) is shown on a
sticker on the base of the device. Change this if you wish.
The new name MUST NOT exceed 19 characters, nor con-
tain any spaces.
Device Password Default is NULL (no password).
NetWare Mode Print Server or Remote Printer.
Frame Type Select the frame types used by your network. (Ethernet
802.2, Ethernet 802.3, Ethernet SNAP, and Ethernet II) By
default, all frame types are enabled.
Novell Remote Printer Mode
Novell Printer NetWare print server to service the Print Server's parallel