Planet Technology FPS-5P-M - Manual (Page 49)

Page 45
Access Select the desired level of access.
Trap Receivers
Receiver No. Select the Trap Receiver number (1..4), and click the Get Data
button to update the display for the selected item.
IP Address Enter the IP Address of the Trap Receiver, which will be sent
the Trap message.
Community This is a text field. Enter the name of the community.
Enable Check to enable; select the severity level.
Note: Currently, all traps are level 1.
TCP/IP
Figure 14: TCP/IP Screen
IP Address IP Address assigned to this device. If using dynamic IP Ad-
dresses (DHCP, BOOTP, rarp), this should be left at 0.0.0.0.
Subnet Mask
(Network
Mask) If the Router (Gateway) Address is 0.0.0.0, the Subnet Mask
should also be left at 0.0.0.0. If you have a router, enter the
Subnet mask for the segment to which the Print Server is at-
tached.
Gateway Ad-
dress If your network segment has a router or gateways, enter its IP
Address here. Otherwise, leave the address as 0.0.0.0.
Connection
Delay before
reconnection
attempts Sets how long the Print Server should wait before retrying a
TCP/IP connection which is lost. Allowable values are from 0 to
255 seconds, with 2 as the default.
Number of re-
connection
attempts Set how many attempts at reconnection will be made. After
that, the TCP/IP session will be terminated.
Allowable values are from 0 to 255, with 254 as the default.