Planet Technology FPS-5P-M - Manual (Page 63)

Page 59
Remote Printer
E-mail Address The E-Mail address for the Internet printer. Your
print jobs will be sent to this E-Mail address.
Mail Server Name
or IP Address This is the name or IP Address of your Mail Server.
If you are on a LAN, ask the LAN Administrator. If
using a dial-up connection, use the data provided
by your ISP.
Your Internet
E-mail Address The normal address that people use to send you
E-mail.
Retry Interval
(Seconds) If unable to connect to the E-Mail server, retry after
this time period (1 to 255 seconds, 30 is usually
OK).
Reply Notification
Mail Check to receive an E-Mail when your print job has
been processed.
5. On completion, a new printer port will have been created.
Using the new Port
The Windows Control Panel is used to connect the correct printer to the InterNet Print-
ing Port. In Windows 95/NT, the procedure is:
1. Select the Printer which matches the remote printer, then choose Properties, as
shown in the example below.
Figure 22 InterNet Printer Properties
2. Select the new port - WAN (InterNet Printer) in the example - as the port for this
printer.
•
If you do not have the correct printer driver, or you wish to create another
printer using an existing driver, use the Windows Add Printer facility.
•
Using the Windows Port Settings or Configure Port facility will reveal the same
Configure Port screen shown in Figure 21 InterNet Printer Port on page 58.
•
If you wish to print to multiple Internet Printers, use the Windows Add Port fa-
cility to add a new InterNet Printer port. Ensure that the correct data is entered
in each port, and that each port has a unique name.