Planet Technology FPS-5P-M User Manual
Page 23
Page 19
6. Accept the default Program Folder. Click Next. The Setup windows will appear
as the files are copied to your computer.
7. The installation will be stopped in 95% for a few seconds and a screen like the
following will be displayed.
•
Click Browse. The Configure screen will search all the Print Server in your
LAN.
•
Select the Print Server you want to use in the Print Server list.
Note: You can find the print server
’s default name in the back panel as SCxxxxxx. It
also represents the print server
’s MAC address. For example, SC123456 shows its
MAC address: 00-c0-02-12-34-56.
•
If you are using 3 ports Print Server, you can click
“Select Device Port” to se-
lect the port which your printer connect to.
•
Press
“OK” to finish the installation.
Note: If the
“Configure PrintServer” screen is not displayed, Press “Alt” + “Tab” to
show it.
Figure 2: Printer Port Setup (Peer-to-peer Print Driver)