B700 only) -25, Setting up the meter • 4, Menu 27: set the default refill amount – Pitney Bowes POSTPERFECT B702 User Manual
Page 60
4-25
SV60941 Rev. C
This menu choice lets you set the default refill amount shown
by the meter when you add postage using Pitney Bowes
Postage By Phone
®
service.
1. The meter prompts “Set Refill Default.”
2. Press
Yes.
3. The meter prompts "Enter Amnt” and shows the current
refill value.
4. Key in the new refill amount. You don’t have to type the
decimal point.
5. Press
Enter.
6. The meter prompts “Amount Set” and advances to the
next menu item.
Menu 27:
Set the Default
Refill Amount
Your meter is equipped with a communications port that al-
lows you to connect it to a serial printer or a Pitney Bowes
Electronic Scale. The printer can produce the reports listed
below:
• Setup Report
• Multi-Account Report (available only when your meter is
equipped with the optional Electronic Interface Unit (Dat-
aLink); this option expands departmental accounting to
100 accounts).
• Service Report (can be accessed and printed only by
Pitney Bowes Service Personnel).
Menu Option 28 lets you specify the type of printer connec-
tion.
IMPORTANT! If your meter is equipped with the optional Elec-
tronic Interface Unit (DataLink), this menu option is not available.
Menu 28:
Set Printer
Connection
(B700 Only)
Setting Up the Meter • 4