Pitney Bowes POSTPERFECT B702 - Manual (Page 34)

3-11 SV60941 Rev. C
You can also select a preset postage value by pressing one
of the four memory keys— Memory 1, Memory 2, Memory
3, Memory 4. The factory defaults for these keys are:
•
Memory 1—First Class Letter, 1 oz.
• Memory 2—First Class Letter, 2 oz.
• Memory 3—Express Mail
• Memory 4—Priority Mail
When the preset value appears in the display bracketed by
three bars, the meter is ready. Process mail as described
earlier.
NOTE: You can program each memory key to store a specific
postage value, advertising slogan and inscription. See the setup
instructions in Chapter 4.
Changing the
Postage Value
(continued)
2. If you make a mistake or change your mind, press C to
clear the entry. The display shows “_”. Enter the amount
you want.
3. If the display shows “Insuf Funds,” the postage amount
you selected is more than the funds available in the me-
ter. In this case, you may want to refill the meter. See
Chapter 5 for instructions. You may also select a smaller
amount of postage and continue processing mail.
4. If the display shows “High Value” alternately with the
postage amount selected, the meter is warning you the
postage value is more than the high limit specified in the
user setup mode. If you want to accept the high value,
press Enter.
5. The meter is ready to
use when the postage
value you selected is
shown bracketed by
three bars. Process
your mail as explained earlier. The display returns to the
default value after the meter has been inactive for a cer-
tain period of time.
Printing Postage
Using the
Memory Keys
(B700 Only)
HINT: The ad slogan
and inscription called
up by the memory key
remain selected even
if you enter a differ-
ent postage value. To
clear this, wait until the
meter times out or turn
it off, then on.
Using the Meter • 3