Pitney Bowes POSTPERFECT B702 - Manual (Page 48)

4-13 SV60941 Rev. C
The timeout length is the amount of time in minutes the me-
ter waits following an inactive period before it returns to the
default display. To change the timeout value:
1. The display prompts “Set Timeout Length?”
2. Press
Yes.
3. The display prompts “Enter Time” and shows current
timeout setting.
4. Key in the timeout value in minutes using the number
keys and press Enter. The timeout value can range from
0 to 1,440 minutes (24 hours). For example, press 1, 0
and Enter to enter a timeout value of ten minutes. If you
want to disable the timeout feature, enter 0 (zero).
5. The display prompts “Timeout Set” and advances to the
next item in the setup menu.
NOTE: If you enter a timeout value the meter can't accept (you
chose a number outside of the minimum and maximum limits),
the display shows “Error” and returns you to the “Set Timeout
Length?” prompt.
Menu 13:
Set Timeout
Length
Setting Up the Meter • 4