Pitney Bowes POSTPERFECT B702 - Manual (Page 33)

3-10 SV60941 Rev. C
Printing Postage
Using the Default
Value (continued)
Changing the
Postage Value
1. Use the number keys to enter the postage amount you
want. You can enter the decimal point (.) manually, or let
the meter do it for you. For example, to set a value of 64
cents: press the 6, 4 and Enter keys; or press the deci-
mal (.), 6, 4 and Enter keys. In either case the result is
.64. If you want to print a fractional value, always press
the decimal point first. To enter 15.8¢, press the decimal
point (.), the 1, 5, 8 and Enter keys. The meter displays
this value as “0.158”.
The same principle applies if you enter a value of one
dollar or more; you can enter the decimal point yourself,
or let the meter do it for you. As an example, to set a
value of $1.40: press the 1, 4, 0 and Enter keys; or press
the 1, (.), 4 and 0 keys, then Enter. The result is 1.40.
4. When the meter senses the envelope, it conveys it
through the print area and into the stacker. If your meter
is equipped with the optional moistener, follow the in-
structions in Chapter 8 of this manual.
5. If no change in postage value is necessary, you can in-
sert the next envelope as soon as the previous one en-
ters the stacker.
3 • Using the Meter