4 • setting up the meter – Pitney Bowes POSTPERFECT B702 User Manual
Page 43
4-8
SV60941 Rev. C
Menus 3, 4, 5 and
6: Set Memory
Keys
(B700 Only)
(continued)
1. The display prompts “Set Memory N Key?”
NOTE: N is the number of the Memory Key.
2. Press
Yes.
3. The display prompts: “Enter Amnt” and shows current
setting.
4. Key in the postage value you want and press
Enter.
5. The display prompts: “Enter Ad” and shows current set-
ting.
6. Key in the ad number you want and press
Enter. (Ad
numbers range from 0 to 5. 0=no ad. If the ad number is
not available, the meter prompts “No Ad” and returns to
the “Set Memory N Key?” prompt.) If you do not want an
ad, key in
0 (zero) and press Enter.
7. The display prompts: “Enter Inscr” and shows current
setting.
8. Key in the inscription number you want and press
Enter.
If you don’t want an inscription, key in
0 (zero) and En-
ter.
NOTE: The Appendix contains a list of inscription codes.
If the inscription is not available, the display shows “No
Inscript” briefly and returns to the “Set Memory N Key?”
prompt.
9. The display prompts “Mem N Set” (where N is the num-
ber of the memory key) and moves on to the next item of
the setup menu.
4 • Setting Up the Meter