Panasonic HD1700pe - Manual (Page 69)

69
F1 SHIFT F2 F3 F4 F5 F6
Memory name
Memory selection
cursor
Warning message 1
F1 SHIFT F2 F3 F4 F5 F6
Warning message 2
File status (VTR)
File number
(VTR) File number
(CARD)
File title (CARD) File title (VTR)
File status (CARD)
F1 SHIFT F2 F3 F4 F5 F6
F1 SHIFT F2 F3 F4 F5 F6
SYSTEM MENU/SETUP MENU/50PIN ASSIGN
File status
[MENU/ERROR LOG/MULTI CUE]
The settings and information can be saved onto or
loaded from the IC card memory. When
(CARD)
is pressed on the button
is held down, the function menu shown below is
displayed.
F
F2
MULTI CUE
ERROR LOG
Warning message 1
Warnings concerning the IC card are displayed here.
NO CARD
The IC card has not been inserted.
UNFORMATTED CARD
The IC card is not formatted.
HD150 FORMAT!
This card was formatted by the AJ-HD150.
HD1500 FORMAT!
This card was formatted by the AJ-HD1500.
Warning message 2
BATTERY!
This appears when the battery inside the IC card has
no charge left. It signifies that it is time to replace the
battery.
PROTECT!
The IC card protection is set to ON.
File status (CARD) File status (VTR)
No storage files are present. - - - - - Blank
Storage files are present.
(Unlocked status) The target file is in the
unlocked status.
≤
Storage files are present.
(Locked status) The target file is in the
locked status.
µ
Function menus
• IC cards are not compatible with other VTR models.
• The IC cards which can be used are the 68-pin two-
piece type of SRAM cards (64KB or more) with
replaceable battery. Model number BN-064HSR is
recommended.
CARD