Function menus, File, Settings – Panasonic HD1700pe User Manual

Page 62

Function menus

SHIFT

Memory name

Memory selection cursor

File title

(VTR)

Warning
message

File title

(VTR)

File number
(VTR)

File status
(VTR)

• This VTR comes with VTR MEMORY

for storing

the current settings (*) and VTR MEMORY

for storing these settings as a backup.

• Each VTR MEMORY can be provided with a title.
• Data can be saved and loaded and titles can be

copied between VTR MEMORY

and VTR

MEMORY to .

• The file locking facility for preventing data from

being overwritten can be engaged for VTR
MEMORY to .

The current setting information, including the SETUP
menu contents, can be provided with titles and either
saved in or loaded from the backup memory in one of
4 variations.

When

(FILE) is pressed while the

button is held

down on the

screen, the following function
menu is displayed.

Transferring files between memories
After selecting the operation file, press
(LOAD).
The contents of files selected in VTR MEMORY
to

can be transferred to VTR MEMORY

When

is selected and

(LOAD) is pressed,

the factory setting mode is established.
Alternatively, when

(SAVE) is pressed, the

contents of a file in VTR MEMORY

can be

transferred to a file selected in VTR MEMORY
to

. (The titles are also transferred at the same

time.)

Name of memory area

Initial title (up to 8 characters)

VTR MEMORY C

CURRENT

VTR MEMORY 1

USER1

VTR MEMORY 2

USER2

VTR MEMORY 3

USER3

VTR MEMORY 4

USER4

Settings

Selecting the operation file in the selected
memory
The number of the currently selected file is
highlighted on the display. When the ADJ dial is
turned, the highlighting moves to the left or right,
enabling operation files to be selected.

Selecting the memory target
Press the

button.

The operation target switches alternately between
VTR MEMORY

and VTR MEMORY

SHIFT

Editing the title of the selected file
Press the ADJ dial after selecting the operation
file.
The first digit of the title display area is highlighted,
and the file title can be edited.
• To input a number, press the number keys.
• To input letters, tap the numbers keys until the

letter to be input appears while holding down
the button.
More than one letter is allocated to each
number key.

• Turn the ADJ dial to move from one digit to the

next in the title display area.

• To enter the title, press the ADJ dial again.

• When the display screen has been switched or

the

button has been pressed during title

editing, the editing enable status is canceled,
and the setting becomes invalid.

• A space can be input by pressing the

button

and button.

* The term “settings” used here refers to all the settings on

the setup menus excluding the SYSTEM menu, what has
been registered in the PF1 and PF2 menu items, and the
contents of some of the function buttons.