Panasonic HD1700pe - Manual (Page 38)

38
Function menus
The function menus are used to set the functions which are frequently used.
The function menus are selected directly using the direct menu buttons on the front panel.
General description
General menus
,
The most basic settings for recording, playback and
TC operations are set on these menu screens.
,
The basic input/output settings for the video signals
are performed and, moreover, the level of the HD
output signals can also be adjusted on these menu
screens.
, ,
The basic input/output settings for the audio signals
are performed on these menu screens.
,
The TC-related settings are performed on these menu
screens.
The settings for superimposing time codes on the
display can also be performed on these menu
screens.
, , ,
Up to 24 frequently used menu items which have
been registered can be used on these menu screens.
,
A maximum of 60 cue points can be set on these
menu screens. In the PAGE mode, 10 pages with 6
cue points on each page are provided so that the cue
points can be managed on a page-by-page basis.
,
The warnings and hour-meter can be checked on
these menu screens. On the SHIFT menu screen,
error log files can be checked, deleted or saved onto
or loaded from IC cards.
The ASSEMBLE editing mode is selected on this
menu screen.
The INSERT editing mode and editing channels are
selected on this menu screen.
Special menus
<>
The SYSTEM menu is displayed on-screen, enabling
various adjustments to be made.
<>
The SETUP menu is displayed on-screen, enabling
various adjustments to be made.
<>
The current setting information, including the SETUP
menu contents, can be provided with titles and either
saved in or loaded from the backup memory in one of
4 variations.
<>, <>
<>, <>
The SETUP menu items which can be registered are
displayed on-screen, and they can be registered into
or deleted from the function buttons.
<>
The current setting information, including the SETUP
menu contents, can be provided with titles and saved
onto or loaded from the IC card memory in one of 8
variations.
<>
The contents of the error logs can be provided with
titles and saved onto or loaded from the IC card
memory in one of 8 variations.
<>
The MULTI CUE menu items can be provided with
titles and saved onto or loaded from the IC card
memory in one of 8 variations.
<<50P IN ASSIGN>>, <<50P OUT ASSIGN>>
Using the front panel controls and on-screen menus,
the functions are registered into the input pins of the
parallel remote (50PIN) connector and the statuses
are registered into its output pins.