Peavey V12 - Manual (Page 59)

micro mute system
Clear Utilities
CLR_SEQ_MT PRESS_CLR
CLR_SEQ_PC PRESS_CLR
CLR_MM_BNK PRESS_CLR
CLR_MM_ALL PRESS_CLR
Show Control
SHOW_CTRL OFF ON
General Controls
BRIGHTNESS BRIGHT_=_5 1-7
REV_LEVEL REV_0.94
Micro Utilities
MAIN_MICRO ON OFF
MAN_MUTES ON OFF
SEQ_SCENES ON OFF
SCENE_OPER CUMULATIVE SINGLE_ALL
SINGLE_MAN
RPD_RECALL
TO_NEXT TO_ACTIVE
TO_ACT+NEXT
PASSWORD SET_PSWORD CLR_PSWORD
UTILITY DETAILS
MIDI Utilities
MIDI CHAN Sets Default MIDI Channel –Used for MIDI Mutes, PgmChng
and Dump. Chan for Next Scene defaults to this; user can change Chan per
Scene.
MIDI BASE Pgm Change Range 1-128 or 0-127
MIDI PCHNG Sets mode of MIDI Pgm Change. Pgm Change received only if
on correct MIDI channel (set above)
SEND PgmChng sent (if present in Scene)
when loading Active Scene (GO, RR or LAST)
RECEIVE Incoming PgmChng command on correct MIDI chan
sets Active Scene.
Display shows XXX RCVD (XXX=Pgm # in selected MIDI base)
BOTH Send and Receive both active
OFF No Pgm Chng sent or received (Overrides individual Scene settings)
MIDI MUTES Sets mode of individual MIDI Mutes (Note On/Note Off).
Note: MIDI Mutes not active while in Edit Mode.
ON MIDI Note info sent when a µ-Mute is pressed.
p. 59