Panasonic DIGITAL IMAGING SYSTEM DP-1810F - Manual (Page 96)

Department Code
96
If you have to change or erase any of the Department Codes, follow the steps below.
Make sure that the FAX/EMAIL lamp is ON. If not, press to select the "FAX/EMAIL" mode.
Changing or Erasing the Department Code
1
SET MODE (1-4)
ENTER NO. OR
∨ ∧
2
ENTER ACCESS CODE
❚❚❚❚
3
If you set the Access Code to restrict the Fax Parameters
settings, the unit prompts you to Input the Access Code.
Input the Access Code and press
.
FAX PARAMETER(1-99)
NO.=
❚
4
77 DEPARTMENT CODE
2:VALID
5
DEPT. CODE (01-50)
ENTER NO. OR
∨ ∧
6
Enter the Department Code number you wish to change
or erase.
Ex: (01 to 50)
INPUT DEPT. NAME
12 PANASONIC SALES
7
then enter a new NAME. (See Note 1)
Ex:
or just go to step 10 to erase the Department Code.
INPUT DEPT. NAME
12
❚
INPUT DEPT. NAME
12 PANAFAX SALES
❚
8
INPUT DEPT. CODE
1234
9
Then enter a new Department Code.
Ex:
INPUT DEPT. CODE
❚❚❚❚
INPUT DEPT. CODE
5678
SET
1 2
P A N A F A X MONITOR S A L E S
5 6 7 8