Panasonic DIGITAL IMAGING SYSTEM DP-1810F - Manual (Page 139)

Troubleshooting
139
Pr
oblem S
o
lving
The Verification Stamp contains ink. When the stamp mark appears faded or hard to see, the stamp should
be replaced or refilled with ink.
NOTE 1. Please contact your local Authorized Panasonic Dealer to purchase a new stamp. See page 51
of the Operating Instructions (For Copier) for order number.
Verification Stamp
To remove the stamp
1
Open the ADF unit.
2
Peel down the Scanning Pad slighty from the left side to
expose the Stamp Assembly as illustrated.
3
1. Remove by pulling the Stamp Assembly upward.
2. Remove the Stamp. Replace the stamp with a new one or
refill the stamp with a few drops of the specified ink into the
back of the stamp.
4
Reinstall the Stamp Assembly.