Panasonic DIGITAL IMAGING SYSTEM DP-1810F - Manual (Page 28)

28
Customizing Your Machine
Your facsimile machine has a variety of adjustable Fax Parameters. These parameters, listed in the
Parameter Table, are preset for you and do not need to be changed. If you do want to make a change, read
the table carefully. Some parameters, such as the Resolution and Contrast parameters, can be temporarily
changed by simple key operation just before a transmission is made. When the transmission ends,
however, these parameters return to their preset values (Home position). Other parameters can only be
changed by the procedure described below.
Make sure that the FAX/EMAIL lamp is ON. If not, press to select the "FAX/EMAIL" mode.
NOTE
1. To scroll the Fax Parameters in Step 2, press or .
2. To print out a Fax Parameter List, see page 133.
General Description
Setting the Fax Parameters
1
SET MODE (1-4)
ENTER NO. OR
∨ ∧
2
FAX PARAMETER(1-99)
NO.=
❚
3
Enter Fax Parameter number from the Parameter Table.
(See page 29 to 31)
Ex:
for STAMP
FAX PARAMETER(1-99)
NO.=004
4
04 STAMP(HOME)
1:OFF
5
Ex: for ON
04 STAMP(HOME)
2:ON
6
To set another parameter, press to return to
Step 3 or press to return to standby.
05 MEMORY(HOME)
2:ON
0 0 4
2
CLEAR
STOP