Panasonic DIGITAL IMAGING SYSTEM DP-1810F - Manual (Page 136)

Troubleshooting
136
Communication
No dial tone 1. Check the telephone line connection.
2. Check the telephone line. 140
No auto answer
1. Check the telephone line connection.
2. Check the Reception mode setting.
3. If the Fax Parameter No. 013 (AUTO JOURNAL PRINT) is
set to "Valid" (default setting) and the machine is printing
the received document(s) from memory, which also
happens to be the 100th transaction, the machine will not
auto answer until the Transaction Journal completes
printing.
140
60
Cannot transmit or
receive An information code will be shown on the display. Refer to the
information code table to find the trouble. 137
No Unit Operation
No unit operation To reset the machine, turn-off the Power Switch for a few
seconds then turn it on again. 11
Mode Symptom Cause / Action Page