Polycom SpectraLink NetLink DCX100 - Manual (Page 47)

SpectraLink Corporation NetLink e340/h340/i640 Wireless Telephones and Accessories User Guide
Part Number: 72-1004-01-J.doc Page 47
number on any line appearance.
Transfer
(Local)
In order to transfer an active call, press FCN 1 . This places the call
on hold and gives you a dial tone for a second call on the same line
appearance. Dial the number that you want to forward the call to
and then press FCN 1 again. The dialed number is called and your
call is disconnected. This is a blind transfer. For a consulted
transfer, press FCN 1 , dial the number, and then press the Dial
softkey. When the party answers, have your conversation and then
press FCN 1 to transfer the held call and disconnect the first call.
If the second call on the active line appearance is already in use, a
consulted transfer is made to the party on that call. Press FCN 1 to
place the first call on hold and converse with the second call. Press
FCN 1 again to transfer the held call and disconnect both calls.
Do not disturb
(Local)
Activate the do-not-disturb feature to reject all incoming calls with a
busy indication by pressing FCN 2 . The handset will not ring for
new incoming calls. Press FCN 2 again to resume ringing.
When the do-not-disturb feature is enabled, the standby screen will
display Do Not Disturb.
Voicemail When the voicemail icon displays dial the number assigned to
message retrieval and follow system instructions to retrieve
messages.
Alternately, if configured, the voicemail system can also be accessed
by pressing the Msg softkey, which will appear after selecting a line
and before beginning to dial.
The
LINE menu will display a plus ( + ) indication when there is a new
voicemail for that line. Indications are cleared when the handset
receives notification that all new voicemail messages have been
read.