beautypg.com

Phone options, System info – Polycom SpectraLink NetLink DCX100 User Manual

Page 15

background image

SpectraLink Corporation

NetLink e340/h340/i640 Wireless Telephones and Accessories User Guide

Part Number: 72-1004-01-J.doc

Page 15

Ring delay Determines how long the vibrate cadence will play before the

audible ring starts. If the Ring Cadence or Vibrate Cadence is
turned off, the Ring Delay option will not appear on the menu.
Select the desired length of Ring Delay:

No

delay: the audible ring starts as soon as the handset starts to

vibrate.

5

second

delay: the handset vibrates for five seconds before

the audible ring starts.

10

second

delay: the handset vibrates for ten seconds before

the audible ring starts.

Auxiliary ring 1
Auxiliary ring 2

Designed to be utilized by OAI applications, enabling the user
to set a distinctive ring for these applications. Select the desired
Auxiliary Ring

Phone options

Noise mode Provides options that describe the noise level in your

environment. Selecting the correct option will adjust the

handset to account for background noise. Select

Normal

for

most office environments;

High

for moderate background

noise; or

Severe

for extremely noisy conditions. Use of the

non-Normal modes is not recommended unless you are in a
loud environment or you may find it difficult to be heard on
your handset.

Key tones Determine if tones play when keys are pressed. Key tones are

enabled by default. Turn key tones on or off.

Warning tones: Play to alert user to various conditions, such as system up or

down, out of range, etc. These tones are enabled by default.
Turn warning tones on or off.

Display contrast Adjusts the display for different lighting situations. Set contrast

by pressing the

Up

and

Down

side buttons until the desired

contrast is displayed and then pressing the

OK

softkey.

Keypad autolock Locks the keypad automatically when in standby mode. The

automatic locking function of the keypad may be disabled (the
default) or adjusted for a delay before locking. Select desired
keypad autolock delay:

Disable

: the keypad will not lock.

5 seconds

: the keypad will lock in five seconds

10 seconds

: the keypad will lock in ten seconds

20 seconds

: the keypad will lock in 20 seconds

System info

Phone IP address Displays the IP address currently assigned to the handset. This

number may not be edited.

Gateway IP address or

Server IP address

Displays the IP address currently assigned to the NetLink
Telephony Gateway (in SRP) or the SVP Server IP (in other
protocols—see appendices).

Firmware version Displays the software version running the handset.