Appendix c: mitel networks, Overview – Polycom SpectraLink NetLink DCX100 User Manual

Page 42

SpectraLink Corporation

NetLink e340/h340/i640 Wireless Telephones and Accessories User Guide

Part Number: 72-1004-01-J.doc

Page 42

Appendix C: Mitel Networks

Overview

The NetLink Wireless Telephone emulates the

Mitel Networks 5220

IP Phone

, shown above,

including: superkey, local muting, timed

reminder, ringer adjust (via superkey), forwarding (via superkey),
hot desk, auto answer (via superkey), and resiliency. Some or all of
these features may be implemented locally.

All telephone functions and messaging features are supported if
possible. Speakerphone functions are not supported.

Certain features and handset operations vary from the SRP protocol.
These variations are explained in this appendix.

In its standby state, the handset displays the extension assigned to

this handset. The active state is initiated by pressing either the

Start

Call

key or the

key. When the active state is initiated, the

handset contacts the PBX and displays the data provided – the time,
date, default line icon, any voicemail icon, and softkey and feature
key labels.
If the

Start

ll key has been pressed, the handset is off-hook and

there is a dial tone.
If the

key is pressed, there is no dial tone; pressing

again will bring up the Menu display.
While in the active state, you may switch to any display – Line,
Feature, or Menu – by pressing its corresponding key. Pressing a
softkey will activate the feature displayed.

Programmable

Line or Feature

keys

Softkey A

Softkey B

Softkey C

Fcn6

Fcn1

Fcn3

Fcn2

Softkey D

Line1

Fcn4

This manual is related to the following products:

SpectraLink NetLink BPN100 SpectraLink NetLink GCN100 SpectraLink NetLink s640 SpectraLink NetLink s340 SpectraLink NetLink DCX200 SpectraLink NetLink DCE200 SpectraLink NetLink 72-1004-01 SpectraLink NetLink DCN200 BPX100 SpectraLink NetLink GCX100