Polycom SpectraLink NetLink DCX100 User Manual

Page 41

SpectraLink Corporation

NetLink e340/h340/i640 Wireless Telephones and Accessories User Guide

Part Number: 72-1004-01-J.doc

Page 41

Feature activation

1. Press the

Start

Call

button followed by the

key. The

Pre-dial labels and corresponding shortcut codes are
displayed.

2. Navigate the list using the side

and

Down

buttons. The

list is circular. Alternatively, the

button may be

pressed repeatedly to display the next set of four options.

3. Select the feature by pressing the

soft key. Alternatively,

press the

Select

button or dial the shortcut, if available. The

handset then sends the programmed codes to the PBX.

4. The

Exit

soft key or

End

Call

key can be used to terminate

prior to making a feature selection.

5. There is a ten second timeout which will return the handset

to the previous state if no additional keys are pressed while
in either Pre-dial menu or pre-dial mode.

6. The PBX could automatically release the call in some cases.

In this case the handset returns to the Standby mode.

7. There is a ten second timeout which will return the handset

to the previous state if no additional keys are pressed while
in the Post-dial menu.

This manual is related to the following products: