Netlink dual chargers – Polycom SpectraLink NetLink DCX100 User Manual
Page 30
SpectraLink Corporation
NetLink e340/h340/i640 Wireless Telephones and Accessories User Guide
Part Number: 72-1004-01-J.doc
Page 30
NetLink Dual Chargers
NetLink e340 Wireless Telephone
NetLink i640 Wireless Telephone
In DCE200 Dual Charger
in DCX200 Dual Charger
Overview The NetLink Dual Charger is a two-slot desktop charger. Model
DCE200 is designed to charge the NetLink e340 Wireless Telephone
and a spare BPE100 Battery Pack; Model DCX200 is designed to
charge the NetLink i640 Wireless Telephone and a spare BPX100
Battery Pack; Model DCN200 is designed to charge the NetLink
h340 Wireless Telephone and a spare BPN100 Battery Pack. The
models are not interchangeable.
Set up the Dual Charger by first obtaining the appropriate
SpectraLink power supply for the country or region. Place the Dual
Charger on a flat, horizontal surface and plug the power supply into
the Dual Charger and into an appropriate wall outlet.
The user must end any call in progress by pressing the
End Call
key
on the handset before placing it into the Dual Charger. Do not
remove the Battery Pack. The handset may be off or in standby
mode during charging.
Place the handset face forward into the Dual Charger front slot.
Place a spare Battery Pack in the rear slot, charging contacts down.
The front slot takes charging precedence; the Battery Pack in the rear
slot will begin charging when the handset in the front slot is fully
charged or when the front slot is empty.
Indicator light When the handset or Battery Pack is seated correctly, the
corresponding indicator light will come on. A bright indicator means
the Battery Pack is charging, a dim indicator means the Battery Pack
is waiting to charge. The indicator light will not come on when the
handset is incorrectly seated, the slot is empty or when the Dual
Charger has no power applied. If the indicator light is off or flashing,
it means the handset or Battery Pack is incorrectly seated. Remove
the handset or Battery Pack and reinsert. If the LED continues to
blink or starts blinking at any time during the charging process, it
indicates that there is a problem with the Battery Pack that makes it
unusable. Do not continue to charge the Battery Pack. Dispose of it
properly and do not attempt to use it in the handset. Do not attempt