Feature access – Polycom SpectraLink NetLink DCX100 User Manual
Page 44
SpectraLink Corporation
NetLink e340/h340/i640 Wireless Telephones and Accessories User Guide
Part Number: 72-1004-01-J.doc
Page 44
Feature Access
Shortcut keys Press the
FCN
key to scroll through the feature list. Press a shortcut
key per the table below to activate system features.
First screen 1 Trans/Conf
2 Cancel
3 Message
4 Redial
Second screen 5 Mute/Unmute
6 Superkey/Hold
7 [may be locally programmed]
8 [may be locally programmed]
Third screen 9
[may be locally programmed]
[may be locally programmed]
[may be locally programmed]
Fourth screen, etc.
[may be locally programmed]
*(OAI)
0 (OAI)
# (OAI)
See FCN Display above for explanation of OAI position.
Hold/Superkey The Hold feature is assigned to softkey D. To place a call on hold,
press the softkey on the far right.
The superkey and hold features swap places depending on the
mode of the handset. When in a call, the superkey is menu item
FCN
+
6
and the
Hold
feature is available through softkey Dddd. When
not in a call, the superkey (
Skey
) is available as softkey Dddd and
the Hold feature is displayed as number 6 on the Feature list.
Hot Desking The Mitel PBX allows configuration of a hot desking feature which
allows a handset to register with the PBX as a different extension. If
so configured, a
HDsk
softkey in position Cccc will appear on the
handset in the active (on-hook) mode.
To change the extension on the handset and log in as a different
user, press the
HDsk
softkey. When the hot desk softkey is pressed,
the PBX displays
No user logged in
and the current extension. Press
the Login softkey (
Logi
) and enter the new extension. Press the
OK
softkey. The display prompts for a PIN number. Enter the PIN and
press the
OK
softkey. The handset will display
Get button defs
as it
checks in with the PBX. Once registration is complete, the new
extension will display and the handset will be in standby mode.
Paging The handset does not incorporate speakerphone capabilities and
therefore receiving a page is not supported. The user may send a
page if this feature has been programmed.
1
Note: There may be more features programmed than there are available shortcut keys. In this situation, the
feature may be activated by using the Up, Down, Select buttons on the side of the Wireless Telephone.