Planet Technology WGS3-2840 - Manual (Page 59)

- 59 -
4.7.1 Port QoS Setting
This section provides Port QoS Setting function from Layer 3 Managed Switch; this function provides Port QoS Configu-
ration and view the Port QoS Configuration Table. The Port QoS Setting screen in
Figure 4-57 appears and Table 4-23 &
4-24 descriptions the Port QoS Configuration Web page objects.
Figure 4-57 Port QoS Configuration Web Page screen
Table 4-23 Descriptions of Port QoS Configuration Web Page screen Objects
Table 4-24 Descriptions of the View Port QoS Configuration Web Page screen Objects
Object Description
Port List Select the Fast Ethernet port, Gigabit Ethernet port or Link aggregation groups for further
management.
Trust State Allow choose 4 different trust mode and the available options are Untrust, Trust-CoS,
Trust-DSCP, Trust-IPPRE. Default mode is Untrust.
CoS(0-7) Allow define value of CoS from 0-7.
CoS Rewrite Allow disable or enable the CoS Rewrite function.
DSCP Rewrite Allow disable or enable the DSCP Rewrite function.
OK Click this button to take affect.
Object Description
Interface Display all the ports of Layer 3 Managed Switch.
Trust State Display current Trust State from each port of Layer 3 Managed Switch.
CoS Display current CoS value from each port of Layer 3 Managed Switch.
CoS Rewrite Display current CoS Rewrite status from each port of Layer 3 Managed Switch.
DSCP Rewrite Display current DSCP Rewrite status from each port of Layer 3 Managed Switch.