Planet Technology WGS3-2840 - Manual (Page 44)

- 44 -
4.6.1 ACL
This section provides ACL function from Layer 3 Managed Switch; this function provides ACL Configuration and view the
ACL table information. The ACL screen in
Figure 4-40 appears.
Figure 4-40 ACL Configuration Web Page screen
The ACL function provide five different ACL type for further management, the detail descriptions are shown as below.
Standard IP ACL
This section provides Standard IP ACL function from Layer 3 Managed Switch; this function provides Standard IP ACL
Configuration and view the ACL table information. The Standard IP ACL screen in
Figure 4-40 appears and Table 4-11
descriptions the Standard IP ACL Configuration Web page objects.
Table 4-11 Descriptions of Standard IP ACL Web Page screen Objects
Object Description
ACL Type: Allow choose different ACL type that shown as below:
Standard IP ACL, Extended IP ACL, Protocol type-code, Standard MAC ACL
Extended MAC ACL
PERMIT/ DENY Allow choose permit or deny for different ACL type.
Source IP Address: Allow input the source IP address.
Wildcard: Allow input the value of wildcard for source IP address.
Counter: Allow define the value for the counter function.
DSCP ( 0-63): Allow input the value of DSCP and the available range is 0-63.
Capture Allow to choose disable (OFF) or enable (ON) the capture function.
Policer: Average(1-1024Mbps) Allow to defined the value of Average and the available range is 1-1024Mbps.
Burst (0-512Kbps) Allow to defined the value of Burst and the available range is 0-512Kbps.
Add Click this button to add specific ACL setting to ACL table.
Reset Click this button to remove specific ACL setting from ACL table.