Pioneer AS-LX70 - Manual (Page 6)

Speaker Setup Guide 01
6
En
Chapter 1
Speaker Setup Guide
Safety precautions when setting up
When assembling the speakers, lay them down flat on
their side to avoid accidents or injury. Make sure to use a
stable surface when assembling, setting up, and placing
the speakers.
Home theater sound setup
Depending on the size and characteristics of your room,
you can place your speakers in one of two ways using this
system.
Standard surround setup
This is a standard multichannel surround sound speaker
setup for optimal 5.1 channel home theater sound.
Front surround setup
This setup is ideal when rear surround speaker
placement isn’t possible or you want to avoid running
long speaker cables in your listening area. Use this setup
together with the Front Stage Surround Advance modes
in page 26.
Preparing the speakers
This unit comes with speaker bases that can be used to
adjust the speakers to the design of the room in which
they are placed.
Using the supplied speaker bases
1 Attach the non-skid pads to the speaker bases, as
shown below.
Use the adhesive side of the pads to attach them to the
base of each speaker base.
Surround (L) Surround (R)
Front/center (L) Front/center (R)
Listening position Listening position
Receiver
subwoofer
Surround (L) Surround (R)
Front/center (L) Front/center (R)
Listening position Listening position
Receiver
subwoofer
Each speaker base
Non-skid pads x 16
HTP-LX70_En.book 6 ページ ２００７年９月２８日 金曜日 午前１０時５１分