Pioneer Super Tuner III DVH-P7050 - Manual (Page 71)

Initial Settings
En 71
Adjusting initial settings
Initial settings lets you perform initial set up of
different settings for this unit.
1 FUNCTION display
Shows the function status.
1 Press SOURCE and hold until the unit turns
off.
• Pressing
SOURCE on the head unit also per-
forms the same operation.
2 Press F and hold until time appears in the
display.
• Pressing and holding
FUNCTION on the head
unit also performs the same operation.
3 Press F to select one of the initial settings.
Press F repeatedly to switch between the follow-
ing settings:
CLOCK — FM — AM — WARN — AUX — DIM —
BRIGHT — SW — (D.ATT) — TEL — DVD
Use the following instructions to operate each
particular setting.
• To cancel initial settings, press
BAND/ESC .
• You can also cancel initial settings by holding
down
F until the unit turns off.
• Pressing FUNCTION on the head unit also
performs the same operation.
•
D.ATT can only be operated when you have
connected the Multi-channel processor (DEQ-
P7050) to this unit. For details, refer to the
Muliti-channel processor (DEQ-P7050) owner’s
manual.
Setting the time
This is used to set the time on the unit’s clock
display.
1 Press F to select the CLOCK .
Press F until the time appears in the display.
• Pressing FUNCTION on the head unit also
performs the same operation.
2 Select the portion of the time display you
wish to set with
1 or ¡.
Pressing 1 or ¡ will select a portion of the
clock display:
HOUR — MINUTE
As you select portions of the clock display the
portion selected will blink.
• Pressing
2 or 3 on the head unit also per-
forms the same operation.
3 Select the correct time with
E or e.
Pressing
E will increase the selected hour or
minute. Pressing
e will decrease the selected
hour or minute.
• Pressing
5 or ∞ on the head unit also per-
forms the same operation.
Setting the FM tuning step
The FM tuning step employed by seek tuning
can be switched between 100 kHz, the preset
step, and 50 kHz.
1
English
Español
Deutsch
F
rançais
Italiano
Nederlands
10
Section